Julien Moyen

Publication date : Oct 2007
Paper File : Wind_Farm_Model_Connected_to_a_Multibus_Net.pdf

Authors

Vincent Lapointe, Julien Moyen, Jean-Nicolas Paquin, Guillaume Dumur,

Abstract

This paper describes the detailed modeling and simulation of a wind farm composed of eight doubly-fed induction generators (DFIG) connected to a 24-bus electrical network. Once built, the model was brought to real-time using the eMEGAsim, a Simulink-based, distributed real-time simulator of electrical power systems. Then, analysis of the steady-state and transient response of the system is made. Finally, the paper concludes with a discussion on the off-line performance and the real-time performance on the eMEGAsim simulator.

Related Products

eMEGAsim PowerGrid Real-Time Digital Hardware in the Loop Simulator_en

Publication date : May 2007
Paper File : 1_Tests_on_23-bus_network_model_and_multimachine_model.pdf

Authors

Vincent Lapointe, Mathieu Giroux, Julien Moyen, Guillaume Dumur,

Abstract

In this document, several power systems will be built and analyzed both with Artemis and EMTP. Load-Flow computations and transient responses will particularly be studied. Load-Flow computation will be made on a 23 bus network, with high fidelity between EMTP and Artemis. Transients will be studied through fault response, once again with a perfect match of waveforms from EMTP and Artemis Time computation and hardware configuration will also be discussed. It will be proved that Artemis is much faster than EMTP to compute complex systems (especially with lots of power electronics components and controls).

Related Products

eDRIVEsim Electric Motors, Drives, and Power Electronics High Fidelity Hardware in the Loop (HIL) and ECU Testing_en
eMEGAsim PowerGrid Real-Time Digital Hardware in the Loop Simulator_en